How To Install A Wooden Mailbox Post
Mailbox Installation
How to Prepare & Mount a Mailbox
Follow U.S. Postal Service® guidelines for installing and placing a new mailbox at your habitation. Go tips on the all-time materials to utilize to set up a curbside mailbox and how to keep it in adept condition. Make sure that your post carrier e'er has a clear path to your mailbox whether it's by the street or mounted on your house.
A mailbox with the Postmaster General's (PMG) seal of approval meets USPS size and construction standards. If you build your own mailbox or purchase a custom-made one, it must meet the PMG standards. Show your local postmaster your mailbox plans or your custom-made box for blessing.
To get drawings and measurements for building your own mailbox, write to US Postal Service Engineering.
Desire to purchase a mailbox big enough for packages? Run into Next Generation Mailboxes.
Here are some helpful guidelines to follow when placing your mailbox:
- Position your mailbox 41″ to 45″ from the road surface to the bottom of the mailbox or point of mail entry.
- Identify your mailbox 6″ to 8″ back from the curb. If you lot exercise non have a raised curb, contact your local postmaster for guidance.
- Put your house or apartment number on the mailbox.
- If your mailbox is on a different street from your business firm or flat, put your full street address on the box.
The all-time mailbox supports are stable but bend or fall away if a motorcar hits them. The Federal Highway Administration recommends:
- A 4″ x 4″ wooden support or a 2″-bore standard steel or aluminum pipage.
- Avert unyielding and potentially dangerous supports, similar heavy metal pipes, physical posts, and farm equipment (e.g., milk cans filled with concrete).
- Bury your mail no more 24″ deep.
Some homes and apartments have a slot in the door for receiving mail instead of a mailbox. The standards for an approved door slot are:
- The opening must be at to the lowest degree one i/two″ x 7″.
- The bottom of the slot must be at least 30″ above flooring.
- Horizontal slots must take a flap hinged at the top.
- Vertical slots must be hinged on the opposite side from the door'south hinges.
For greater privacy, you can as well install a post slot hood on the inside of your door to forestall someone from seeing into your dwelling. The standards for door slot hoods are:
- The hood should not projection more than 2 1/16″ beyond the inside of the door.
- On a horizontal slot, the hood should not extend below the bottom of the exterior plate.
- On a vertical slot, the hood should not extend beyond the side of the exterior plate on aforementioned side as the door'due south hinges.
- To replace your curbside mailbox with a wall-mounted mailbox, yous must get your local postmaster'south permission.
- Choose from a diverseness of mailbox sizes and styles; mounted mailboxes are non required to have a PMG seal of approval.
- Get a wall mailbox that can hold a normal day's postal service volume, including letter-sized envelopes, postcards, and catalogs.*
- Identify the mailbox near the chief entrance and then your mail carrier can easily come across it.
*Note: Wall-mounted mailboxes may simply be used for items with postage. Newspapers may non be placed in the mailbox.
Mailboxes take a beating from the weather, so nosotros recommend an annual mailbox checkup to avoid damage to your mail or difficulty identifying your address.
- Tighten loose hinges on the door
- Take care of rusty or loose parts
- Replace missing or faded house numbers
- Keep the path to your mailbox clear
Source: https://www.usps.com/manage/mailboxes.htm
Posted by: rockwellfook1949.blogspot.com
0 Response to "How To Install A Wooden Mailbox Post"
Post a Comment